How to fix error code 0x97 on epson printer

Epson Error Code 0x97 is a common hardware issue encountered by older Epson printer models and we are here to help you fix this issue.

It’s common knowledge that Epson printers have high precision and reliable performance. However, in the case of errors such as Error Code 0X97, it is important to know how to fix them quickly before they become worse. This guide should tell you the steps that must be taken if your Epson printer shows this error code so that you can take care of any urgent printing task without a hitch!

How To Fix Epson Error Code 0x97

Do a hard reset on your Epson printer

When fixing Epson error code 0x97, you need to hard reset your printer first. To do this, you need to unplug the power cord at the back of your Epson printer without using the power button to shut it off. Wait at least two minutes before you plug it back on.

Clean the printhead using printer tools

Once the Epson printer is running again, do not print any document yet. You need to do a printhead cleaning task. You can start this by looking for the printer maintenance option on your printer display screen or use the printer software on your computer if the printer is connected to it.

Try to print a test document and check if the error 0x97 code has disappeared on the screen.

Remove your ink cartridges

If the error persists, you need to remove all your ink cartridges inside your Epson printer. Make sure to place the Epson ink cartridges in an inverted position on top of a clean, dry paper or towel.

Remove the printhead

After removing the ink cartridges, proceed on taking out the printhead of your Epson printer. Do this carefully, you don’t want to damage this expensive part of your printer.

Clean the printhead manually

Wipe the bottom of your printhead thoroughly with a clean, lint-free cloth damped in warm water. Hang on to that fabric until there’s no more black ink smudging across it.

Soak the printhead

Soak the printhead in a bowl with warm water for 10 minutes. Do not use boiled water as it will damage the ink’s properties and can cause irreversible clogging of nozzles to happen, which is bad news!

Once the printhead has been soaked in water, remove it from the bowl and carefully wipe off any excess moisture using a dry lint-free cloth. Get a clean paper towel and let your printhead rest on it for a while (about 15 minutes) before you put it back to your Epson printer.

Reinsert printhead and ink cartridges

Stick the printhead back to your printer and put all your ink cartridges in.

Print a document

Turn it on to see if there are any changes and if the Epson error code 0x97 is not showing anymore. Print a document and see if it prints correctly.

Alternate Solution To Error Code 0x97 On Epson Workforce Printer

If your Epson printer is not printing and is displaying error code 0x97, you may have encountered a malware problem. To fix this issue, update or install the latest software for anti-malware protection to ensure that your devices are protected.

If an Epson display appears with an error code of 0x97 on it, then there might be some malicious content going into your device. Ensure that you keep everything up to date by downloading and installing the latest Epson printer software.

You may also want to check if the firmware you have for your Epson Workforce printer is the most recent version. You can visit Epson Support to verify which is the latest firmware for your printer model.

Recommended Items For Epson Printer Owners

[aawp table=”1213″]

What Causes An Error Code 0x97 In Epson Printers?

The error code 0x97 is just one of the many pitfalls you may experience with your Epson printer. If this problem occurs, it will completely disable any functions and signals that are being sent to your device as soon as they happen. You won’t be able to use or turn on your printer until a full repair has been made!

So why is your Epson printer showing an 0x97 error code?

You can see an Epson error code 0x97 on your printer’s LED screen. This error happens while you’re printing, forcing the printer to shut down unexpectedly. It mostly occurs with models in the Epson WorkForce series that use 252 ink or 786 ink.

The Epson 0x97 error code is a type of warning whenever your printer encounters an internal hardware issue. It can be because of some kind of malfunctioning motherboard or another component within the machine. Once you see this message on screen, it’s most likely due to faulty internals and needs fixing as soon as possible.

If your printer is giving an error code of 0x97, it might be because the printhead has become dirty and clogged. To fix this printhead problem, you can clean out any dirt or debris from inside to get back up running again quickly.

Error code 0x97 can also be caused by outdated printer software. If you’re still running an old version of your printer’s malware protection, install or update it immediately to prevent any further errors.

Frequently Asked Questions About 0x97 Error Code

The Epson error code 0x97 is typically a result of the printer experiencing an issue with its carriage unit. If you’re experiencing this error, there are steps that you can take to fix it and get your printer back up and running again. Here are some of the most common questions asked by Epson printer owners about this error code.

What does error 0x97 mean?

It’s a printer error that can be caused by many different things, but it’s typically related to the hardware of your Epson printer, specifically the printhead. Epson error code 0x97 means you will not be able to print anything using your Epson printer without fixing this issue first. This happens as a result of your printer’s printhead malfunctioning.

What is the main cause for the Epson 0x97 error code?

Error code 0x97 is usually caused by an internal hardware issue. This means there is something wrong with one or more components inside your Epson printer.

How do I fix Epson error 0x97?

The most common Epson error code 0x97 fix is by hard resetting the printer. This can be done by turning off your printer and then on again, but this also requires unplugging from the power supply and plug-in back into it afterward.