Introduction
Greetings, fellow tech enthusiasts! Today, we’ll be discussing how to bypass ink cartridge on Epson printer.
Now, before we dive into the nitty-gritty of this subject, let’s take a moment to appreciate the sheer absurdity of the fact that we even have to do this.
I mean, come on – we live in an age where we can send people to space and cure diseases, but we can’t figure out a way to let people print things without constantly having to buy expensive ink cartridges? It’s madness, I tell you!
Words of Caution
If you’re reading this, chances are you’ve had enough of Epson’s shenanigans and you’re looking for a way to bypass their ink cartridge system.
Well, fear not, my friends – with a bit of know-how and some crafty workarounds, we can get your printer up and running without breaking the bank.
First things first, it’s important to note that bypassing the ink cartridge on your Epson printer may void your warranty, so proceed at your own risk.
That being said, if you’re ready to take the plunge, here are a few methods you can try:
How To Bypass Ink Cartridge On Epson Printer | 3 Methods
To bypass ink cartridges on Epson printers, there are several methods available.
The print drivers in Epson printers typically refuse to print once the ink level has reached a certain level, even if some ink remains in the cartridge.
Therefore, it is recommended to keep a replacement Epson ink cartridge before the situation arises.
However, if you need to bypass the ink cartridge, here are three methods you can follow:
Method 1 – Bypassing Ink Cartridge on Epson Printer:

- Open the lid of the printer and hold down the ink button.
- When the ink holder moves to its position, open the lid of the cartridge that has no ink and then close it again without removing the cartridge.
- Close the lid and start to print.
- This method works on printer models without a microchip on the cartridge to track ink levels. By following this method, the printer will think a new cartridge has been installed, and you can use the remaining ink until you bring a new one.
Method 2 – Shaking the Printer Cartridges:

- With the printer powered on, lift the printer cover and wait for the cartridge to stop moving.
- Press the tabs on the short end of each cartridge to remove them.
- Turn off the printer and unplug it from the power source. Wait for a few minutes for the printer’s memory to reset.
- Shake each cartridge to redistribute the ink inside.
- Place each cartridge back in the printer and plug it back into the power source.
- This method involves shaking the cartridges to redistribute the ink inside, and it can help you bypass the ink cartridge on your Epson printer.
Method 3 – Resetting the Cartridge:

- Carefully remove the cartridge as described in Method 2.
- Check the cartridge’s end containing the copper contacts.
- In some printer models, a reset button is present for resetting only the contacts in the center. Press the reset button carefully using a paper clip or other object.
- After resetting each cartridge, place them back in their position.
- The printer will accept them as new cartridges.
- By resetting the cartridge, the printer will accept it as a new cartridge and allow you to bypass the ink cartridge.
These three methods are simple and effective in bypassing the ink cartridge on your Epson printer and saving Epson ink. Follow the steps carefully to avoid any unwanted mistakes.
Benefits of Bypassing Epson Printer’s Ink Cartridge and Expert Tips
Bypassing the ink cartridge on an Epson printer has several benefits, including saving money, getting more prints per cartridge, and using third-party ink cartridges.
By refilling the tank with new ink when it runs low, one can save a significant amount of money in the long run.
Bypassing the ink cartridge also enables the user to get more prints per cartridge, typically over 1,000, compared to the usual 500-600 prints from a regular ink cartridge.
Additionally, third-party ink cartridges are cheaper and easier to find than regular ink cartridges.

An expert tip for bypassing an Epson printer’s ink cartridge is to go to the control panel and locate the “service” or “maintenance” menu. Look for the “reset counter” or similar option, select it, and follow the on-screen instructions.
By doing this, the printer can recognize any brand of ink cartridge that you put in it, which saves money and avoids running out of ink in the middle of a project.
It is important to follow the instructions closely to avoid any damage to the printer or cartridge when bypassing an Epson printer’s ink cartridge.
Although it is possible to trick the printer into thinking it has ink by resetting the printer’s internal counter or pouring dark substances into the cartridge wells, these methods may not work and can damage the printer.
When the printer runs out of ink, it will automatically print a message that tells you to replace the ink cartridge, which cannot be overridden.
To print in black and white on an Epson printer, you need to change the printer settings by opening the printer dialog box, selecting the Properties tab, clicking on the Color tab, changing the setting to black and white printing, and clicking OK.
Conclusion
In summary, bypassing the ink cartridge on an Epson printer has many benefits, including saving money, getting more prints per cartridge, and using third-party ink cartridges.
To do this, follow the expert tip to reset the printer’s counter to recognize any brand of the ink cartridge. Be sure to follow the instructions closely to avoid any damage to the printer or cartridge.
So there you have it, folks – a few methods for bypassing the ink cartridge on your Epson printer.
Of course, I wouldn’t be a true tech expert if I didn’t caution you to proceed with caution and at your own risk. But hey, sometimes a little bit of rule-breaking is necessary to stick it to the man (or the printer manufacturer, in this case). Happy printing!